Vintage Timber Handles | Teak Handles & Door Pulls

Squircle

Modern vintage style wooden pull handle. Individually each of the pulls are rectangular in shape with rounded outer edges. Mounted together these handles form a squircle - a square with round edges. They work well on either the horizontal or vertical plane and can be used on doors and drawers. These handles also look fabulous as large feature handles on big double doors. If you are looking for a substantial nouveau handle, you are in luck!

On Horizontal

Victorian ash (Tasmanian oak)

On Vertical

Merbau

Wide

American White Oak (US Oak)

Big & Small

American white oak (US oak)

Rustic Timbers

Victorian Ash (Tasmanian oak) with gum vein

All details below

Specifications • Information • Quote

See more handles in situ

Specifications

Handle Specifications

Name: Squircle
Code: SDH003a
Range: Vintage

Type: Square pull

Variant: N/A

Material: Wide range of timbers available to choose from including:

Pine
Victorian ash (Tas oak) (OD)
US white oak (US oak) (OD)
Blackbutt (OD)
Spotted gum (OD)
Merbau (OD)
Blackwood
Walnut
Other

Finish: Raw

Size: 50mmW x 100-500mmL (Pair width is 100mm)*Sizing may depend upon timber availability

Fixings: Single sided fittings & Back to back fittings with cover buttons.

Custom sizing:

Available

Timber Detail:

Please note: Photo's of timber items are indicative only. Timber may vary in colour and grain from the images shown. These attributes will vary with each piece even when it is from the same species and often even from the same board.

Outdoor timber (OD)
All handles are made to order.

Information

FYI

This section will provide many answers to questions you may have, it is filled with useful information. Take your time and browse through, if there are still unanswered questions please do not hesitate to ask!

Timber

Timber is a natural product and the many species available vary widely in colour, characteristic and accessibility. Below is some information that may assist in deciding on the right timber for your handles.

Timber availability

Timber characteristics

Matching timbers

Exterior timbers

Supply your own timber

Fittings

All handles are fitted with a threaded insert in the rear and are supplied with hardware for fixing. There are 3 different fixing types and each is suited to a different application:

1. Single sided fittings

2. Back to back fittings

3. Concealed fittings

Replacing Existing Handles

In most instances we can make handles to fit existing fittings.

To get this right we will need the measurements described below. All measurements are needed in millimetres (mm). Measurements required for numbers 2 & 3 must be taken from the hole centres.

The size of the existing holes
The distance between holes from centre to centre (only needed when the existing handle has 2 fittings e.g. rectangular handles)
The distance from the centre of the hole to the closest edge of the door.

Please only supply written measurements, a photo showing a measuring tape or ruler to illustrate the measurement is unreliable with small dimensions.

Finishes

Handles are all finished raw ready for sealing, painting or staining. Often cabinet makers or builders will arrange the finishing of these products for you. However the application of finishes is relatively easy and suitable for any person in the mood for a bit of DIY fun.

Interior finishes

Exterior finishes

Lead time

All products are made to order. The lead time is generally 10-15 working days from order confirmation plus delivery time. There are times where the lead time will vary from this, sometimes quite substantially depending upon work in progress. We do not carry stock so please check and consider these production and delivery times in your project plan.

Choosing sizes

The choice of handle size can often be one to the most difficult decisions to make when ordering handles. Sizing preferences vary widely from customer to customer.

One easy solution to help with the size decision is a very simple template. 3 easy steps:

1. Cut a template from paper or cardboard to the preferred size
2. Mount it on the door with blutak
3. Stand back to view

This will provide a quick visual representation of how the handle will look in situ and help you choose the size with confidence. Test out a few different sizes until you find the perfect fit.